I threaded up some big embroidery needles with embroidery floss, and gave him some sweater scraps to use as patches (why yes, I do have a bag of old sweaters in my closet just for the purpose of things like this!) I showed him what to do, and did a few stitches to get him started, and he did great! Here’s a poor cell phone photo of him in action..

I think the patches actually add a great deal of interest to the original snake. He’s also re-named the snake “Patches”. One of the eye buttons had broken, too, so we replaced the buttons with some eyes I’d gotten from the lovely Colleen at Some Art Fabric (who has actually made a sweater snake in the past!). I’m loving Snake 2.0! Here’s the how-to on how to make the snake, if you’d like one yourself!
He loves his snake, and he loves that he did it himself (with a bit of help from mom here and there).

Hi! I’m Heather from Dollar Store Crafts, a daily blog devoted to making cool crafts with dollar store stuff. I’m so excited to be swapping holiday posts with Dot!

Do you love felted sweaters as much as I do? Felted (or technically, “fulled”) sweaters are made from animal hair-based yarn (like wool, alpaca or cashmere), and washed in hot water and dried in the dryer until they shrink up and the fibers are fused together (kind of like dreadlocks on a micro scale). Once a wool sweater is felted, the fabric can be cut and it won’t fray. It’s an amazing material for crafting. You can use a felted sweater as the base for all kinds of cozy winter goodies, like these cute mittens.

You can find wool sweaters at the thrift store. Just make sure the tag says it is mostly or 100% animal fiber. Need to know more about the process of felting? Check out this post by Diane Gilleland at Craft Stylish about felting your sweaters.

Project Materials:

• Felted sweater
• Scissors
• Sewing stuff (sewing machine & thread)
• Paper and pen

To Make Mitten Template:

Trace your hand (or your child’s hand) on a piece of paper.

Add a seam allowance line about 1/2 inch around the outside of your traced area.

Place template on sweater and cut out two pieces for each hand.

Place pieces right sides together and sew around the edge. Be sure to reinforce the seam at the cuff of the mitten by backing your stitch up a bit.

Clip any excessive extra fabric (pay attention to the area near the thumb), and turn mitten right side out. Try on mitten to see if it works. If you need to, you can turn it back inside-out and adjust.

Smile because that was so simple and quick!

Visit me at Dollar Store Crafts for more great holiday ideas and tutorials!

This would be a great project to do with friends for your own craft night, or to make with kids.

Behold! The Flying Purple People Eater and the Fluffy-head –>

This tutorial is less ‘step by step’ than my usual ones, since the object is not to create what I created, but to make your own monster up!

So, what do you need?

• Sweaters, preferably already shrunken/felted. You’ll need a sleeve that is big enough to be the body of your puppet.
• Scrap felt/sweaters to make your embellishments.
• Eyes – either safety toy eyes, buttons, or you can make out of the felt scraps if you like. That’s of course assuming your monster has eyes! (I was lucky enough to have a few toy eyes that the lovely Colleen from Some Art Fabric had given me, and they worked great!)
• Embroidery thread.

First, pick your sleeve. You can use a solid color (we both did purple here) or stripes, or whatever works for your monster. Cut off the sleeve, trimming the part near the shoulder so it is even all around (like a giant sock).

Next, plan your head. We did a couple of different things here, but here are a few options:
1) Square – just turn inside out, and sew the cuff together in a straight line.
2) Curved – sleeve inside out, trim a curved line, and stitch together.
3) Rounded – See the example below. Although my ‘spikes’ should have been shorter. It was pretty messy, but that was ok, since I was adding a horn.
4) Fluffy – See the example below – with sleeve right side out, gather a few inches from the top. Weave thread back and forth, and pull tight. Afterwards, you can cut the cuff to resemble hair! (Note, in the pictures, this was done after creating the mouth. Either way works)
One thing we would do, in hindsight, would be to stitch in some scraps or padding in the inside of the top of the head. This would help the head stand up better on a small hand.

You’ll also need a mouth. Here’s a couple we did:
The Fluffyhead has a mouth with lips, created by turning the puppet inside out and stitching an oval of fabric on the inside.
The People Eater’s “scary” mouth was done by whipstitching on the mouth from the outside.

The rest is all embellishment and adding personality.

Arms: Since ours were for 3.5 year olds, we decided against arms, as they are hard for small kids to manipulate. If you like you could just stitch on non-functional arms.
Horn: For the people eater, I made the horn by cutting out a circle of sweater fabric, cutting a 2/3 “pie piece” out of it, and wrapping it into a cone. Very trial and error. I stuffed it with a few fabric scraps and stitched it on top of the head with a whip stitch.
Eyes: Sew on buttons, press on toy eyes, cut fabric circles for eyes… For the People eater I used a fabric circle cut out of felted sweater, made a hole in the center for the post of the toy eye, and pressed it through. Then I used a blanket stitch to attach the felted circle to the head.
Nose: Holly’s Fluffyhead had a couple of felt circles bunched and stitched on in the center. You could also do buttons, or whatever.
Other: I cut out wings out of sweater material and used a simple straight stitch (it was getting late!) to sew them to the sides of the People Eater Body. Holly attached a felt star to the belly of the Fluffy head. Use your imagination here!

The finished puppets!

Hope you enjoyed this and it gave you some ideas for a fun evening of puppet making!

Related:

• Octo-puppet – this one is more of a typical tutorial, making an octopus puppet out of old sweaters and buttons.
• Sweater snake
• Elephant Purse

1. Felted Sweaters, cut into fun shapes – I’m lucky enough to have borrowed a die cut machine (thanks, SomeArtMama!), but you can just cut them out with scissors. Trace around cookie cutters or look for shapes on the web to make a paper template (search google images for things like heart template and flower template).
2. Supplies: Embroidery floss, a button, 3 felt shapes in graduated sizes, safety pin(make sure you needle will fit through the holes in your button!). Felt shapes: for the 2 I did, this one was heart, then flower, topped with circle. The other was flower, star, topped with circle– be creative!
3. Use wire pliers to sprong out your safety pin – You’ll want to separate the loop at the end so you can slide your fabric around it.
4. Stick it in, centered where you want the pin to go, (look at the back – all the silver showing should be able to be covered by your next layer).
5. Slide it through until its on the other side, you’ll have to bunch up the felt and twist it to get it around your loop.
6. Close pin, If you’re giving this to a small child, you may want to dull the point of your safety pin so they won’t prick themselves as easily.
7. Stack your design, (well, you probably did this earlier!)
8. Ready to assemble, Start with the side without the safety pin closure.
9. Place first flower,
10. Sew it on, starting in the center of the flower so your knot will be covered by the next layer. Make as small stitches as possible on the back side. For extra security , you can stitch around the saftely pin so it’s held by the thread as well.
11. Sew on top layer and button, You’re just sewing these to the middle layer, so you don’t have to go all the way through to the back (hides most of the stitching)
12. Note you’re hiding most of the stiching in the middle.,
13. Tie off thread, hidden in the middle,
14. Completed Front,
15. Completed back,
16. Looking adorable! I gave this as a gift for a three year old, attached to the cute heart pink shirt.

Update:

A second version

We documented the process, so here it is. You’ll see both of the prototype ornaments we made in the steps. Tutorial below pictures.

(PS: We have some great guest blogger how-to’s coming over the next few days!!)

1. Felt and old wool sweater (shrink it!)., 2. Cut our your ornament shapes, 3. Cut a ‘window’ in one of your two halves, 4. Materials: sweater material, old plastic packaging, embroidery thread, ribbon or thread for hanging, 5. Cut a square out of your packagin slightly larger than the window., 6. sew the window on to your sweater, 7. Window sewn in, 8. Stitch the two pieces together,, 9. Leave a space large enough to stuff/insert picture., 10. Stich around the window to cover your thread, 11. Ready to stuff: insert picture, and stuff, and then stitch closed, 12. Hang on tree!

Materials:
Old wool sweaters, felted. I washed these in the washing machine with hot water and they shrunk nicely. Just google for felting sweaters if you need more info.
Flexible clear plastic – repurpose packaging from kids toys or similar. Mine was a bag from a diaper bag set.
Pictures
Embroidery thread
Ribbon (for hanging or embellishing)
Stuffing (polyfil or whatever you have on hand, even extra sweater scraps)

Cut out 2 matching ornament shapes from the body of the sweater.
Cut a ‘window’ in one of your two halves slightly smaller than your picture.
Cut a square out of your plastic slightly larger than the window.
Sew the window on to your sweater – I machine stitched this, but you can save a step and just sew on by hand with embroidery thread. (If your fabric has an obvious front and back, be sure to sew the ‘window’ plastic to the back of the fabric)
Stitch the two pieces together using a blanket stitch. Sew in a loop of ribbon when you get to the top, and leave an opening at the bottom for stuffing and to insert the picture (note, you can insert the picture, tacking it in with tape or glue, prior to this step if you like)
For extra interest, I stitched around the window to cover my thread. (I didn’t do the neatest job sewing it on the machine!)
Insert your picture in through the bottom hole. (I didn’t do anything to secure it, just stuffed behind it and it seemed secure enough)
Stuff and then stitch closed. I had a little extra ribbon, so I added a tassel on the bottom when I was closing up the bottom.
If you’re really good, embroider the year on the back.
All ready to wrap for a gift or hang on the tree!

Related: All Recycled Sweater projects

In other news:
If you missed it, Friday’s Holiday Inspiration Links

.. and
A few quick fun & silly Xmas links for you today:
–Chrismukkah Decoration Set at Superpunch
–Most unusual Christmas Trees at Neatorama
–Light up the Christmas Tree Puzzle
–Santa Don’t Miss or Else Game

I made this — one of my first recycled sweater projects — for The Boy last year. I can attest that he totally loves it still. All the details are at the Instructable embedded above, or click here.

How to make a cute little elephant purse by recycling old sweaters.. I did this as a Christmas gift last year. It’s simple to make, cheap, and was much loved by the recipients. This is my own design, and I encourage you to try it yourself and add your own spin!

Related posts:
Another version of the Ele-purse. (This one is sturdier and more colorful).
See all recycled sweater projects here.
A reader does her own take on the elepurse – Nifty!
July 08 – The Baby Elepurse

The Process:

In case anyone wants to try it, here’s how i did it. And please do, just give me credit ;). I’m sure someone with more skill could do a much better job, and this is a very creative project, in that you could vary the materials, face, or construction and come up with a very different outcome. Be warned, this was a no-pattern trial and error experiment, so the directions may not be the best I’ve ever written. If I do it again, and anyone is interested, I might make a pattern.

I picked a sweater from the ones I had bought. This one was a light green lambswool, either a ladies or girls size.
The original idea was a backpack, but I didn’t know how long to make the straps, so I decided to go with a bag instead.

The Sweater collection:

the “body”
I started by cutting a square out of the bottom, leaving one side seam intact. I reversed it, and sewed it into a pouch (if i’d done the backpack idea, this would have also been when i added the straps in). The bottom finished edge of the sweater serves as the open top. The size could vary dependant on the size of the sweater (and the desired end result), but i made the pouch just slightly wider than the top of the sleeve of the sweater. Stitch a ribbon or whatever you want to use as a handle on either side of the pouch. If I’d been feeling ambitious i might have tried making the strap out of the sweater material, but I wasn’t.

the trunk/head
I cut the sleeve off straight at the shoulder. Since this sweater had 3/4 length sleeves, I used the whole thing, but basically, you need it to be a few inches short of the length of the pouch. Turn the sleeve wrong side out, and center the seam in the back. Now to make the trunk skinnier: About half way down the length of the sleeve, mark with pins. Come in about 3/4 in (depending on the size of your sleeve) on either side of the finished sleeve end, and mark with pins. You want a couple of inches between the pins. Then one each side, sew diagonally from the end pin to the middle pin. Turn rightside out and see if it looks vaguely elephant head like!

Turn the pouch so that the front is showing. Turn the trunk so the back is showing, trunk pointing up.
Slide the top of the sleeve into the pouch about 1/2 in and sew in place to the back of the pouch. The head and trunk should form the flap of the purse now.

the face
I just guessed on the ears. Trial and error gave me a 45 degree triangle, with one side rounded off, and folded a bit to make them stand up. Hard to explain in writing :). I just tacked them on the sides of the head, and covered with buttons. Then added buttons for eyes, and that was about it! More embellishment might be fun too.

Finished project, and other versions:

Henri is a fun little puppet made out of recycled sweater sleeves – more on Henri here.. If you liked the hand drawn tutorial for the Monster Wreath, you might like this too!

Click through to see/download the full size instructions.

Materials needed:
Two coordinating sweaters, felted. 1 sleeve from each.
Felt for eyes
Buttons (if you’re up for the fun of sewing on all those suckers!)
Embroidery thread
I sewed everything but the embellishments on the machine.

Prototype Henri:

This can be modified to do a stuffed toy rather than a puppet by simply stuffing the head fully, and then sewing up the secondary sweater where the legs meet.

If you try him, please let me see your results, and you can post to the Dabbled flickr group : http://www.flickr.com/groups/dabbled/